GM-3568JHF Introduction
1 Product Overview
1.1 Scope of Application
This product is an FPGA development board — a heterogeneous multi-core domestic industrial development board designed around the Rockchip RK3568J and Unigroup Tongchuang Logos-2 PG2L50H FPGA. The board consists of a core module and a carrier board. It is widely applicable in industries such as communications, image and video processing, data analysis, network and information security, and instrumentation. The bundled demos can be rapidly adapted to fields like IoT (smart Internet of Things), voice recognition, human-machine interfaces, industrial control, and intelligent robots.
1.2 Appearance and Interface Diagram
Front:
Back:
Front view:
Photo notice
The photos above were taken of a board sampled from one of our production batches. Because the product is under continuous maintenance, the board you actually receive may not be identical to the photos.
2 Basic Features
| Feature | Description |
|---|---|
| Board dimensions | 220*150mm |
| CPU | Quad-core 64-bit Cortex-A55, up to 2.0GHz |
| GPU | ARM G52 2EE; supports OpenGL ES 1.1/2.0/3.2, OpenCL 2.0, Vulkan 1.1; embedded high-performance 2D acceleration hardware |
| NPU | 1 TOPS computing power |
| Operating system | Harmony, Linux, Android |
| Memory / Storage | Standard 2GB (4GB optional) / Standard 32GB (16GB/64GB optional) |
| HDMI output | 1 channel, standard Type-A receptacle, supports up to 4Kx2K@60Hz |
| MIPI output | 1 channel, can directly drive MIPI-interface LCDs of various resolutions, up to 1920*1080 |
| Audio I/O | Speaker output (left/right channels, default 6W, configurable to 10W), MIC IN * 1 |
| Headphone output | Supports one 3-pole/4-pole headphone jack |
| USB | 1× USB3.0 OTG, 3× USB HOST |
| Serial ports | 1× RS232, 1× TTL, 2× RS485 |
| I2C | 1 channel; can connect I2C touch panels or peripherals |
| Raspberry Pi header | 1×, 2×20-pin pin header, 2.54mm pitch |
| Networking | 1. 10/100/1000M auto-sensing Ethernet 2. Built-in Wi-Fi with Bluetooth 3. Built-in MINI PCI-E slot, supports 4G data (does not support analog or digital voice calls) |
| Storage | Supports USB flash drive and TF card expansion |
| RTC | Real-time clock, low-power support |
| System upgrade | Supports local USB upgrade |
| CAN | 2× CAN interfaces |
| JTAG | 1× ARM JTAG |
| Buttons | 1× reset, 1× user-programmable, 1× POWER ON, 1× Uboot flash button |
| LED | 2× user-programmable indicator LEDs |
3 Further Reading
Tips
You can download relevant materials — such as the 03-Product Specification and 04-Hardware Documentation — from the Downloads page.
Note: Any software, tools, or source code referenced later in this documentation can be found in the Downloads section!
Copyright
This user manual, including but not limited to all the information it contains, is protected by copyright law. Without permission from ShiMetaPi, no imitation, copying, excerpting, translation, distribution, or other use is permitted.
Disclaimer
Ownership and intellectual property of any third-party product names or content mentioned in this user manual belong to their respective owners and are protected by applicable intellectual-property laws and international treaties.